WILDEN Pro-flo Series 1-1/2 Inch P4 Plastic Air-Operated Diaphragm Pump

Hot selling models
P4/PPAPP/BNS/BN/PBN
P4/PPAPP/BNS/BN/PBN/0504
P4/PPAPP/EPS/EP/PTV
P4/PPAPP/EPS/EP/PTV/0504
P4/PPAPP/FWS/WF/PTV
P4/PPAPP/NES/NE/PBN
P4/PPAPP/NES/NE/PBN/0504
P4/PPAPP/NES/NE/PTV
P4/PPAPP/TEU/TF/PTV
P4/PPAPP/TEU/TF/PTV/0504
P4/PPAPP/TNU/TF/KTV
P4/PPAPP/TNU/TF/PTV
P4/PPAPP/TNU/TF/PTV/0504
P4/PPAPP/TSS/TF/PTV
P4/PPAPP/TSU/TF/PTV
P4/PPAPP/TWS/TF/KTV
P4/PPAPP/TWS/TF/PTV
P4/PPAPP/TWS/TF/PTV/0504
P4/PPAPP/VTS/TF/PTV
P4/PPAPP/VTS/TF/PTV/0504
P4/PPAPP/VTS/VT/PTV
P4/P

PDF
Product Description:
AIR INLET
  • 1/2" FNPT

LIQUID INLET
  • 38 mm (1-1/2")

LIQUID DISCHARGE
  • 38 mm (1-1/2")

CONNECTION TYPE
  • DIN/ANSI (Flanged)

MAX SUCTION LIFT CAPABILITY
  • Rubber – 4.88 m (16') Dry, 7.92 m (26') Wet

  • TPE – 3.96 m (13') Dry, 7.92 m (26') Wet

  • Full-Stroke PTFE – 4.7 m (15.3') Dry, 9.3 m (30.6') Wet

  • Reduced-Stroke PTFE – 3.05 m (10') Dry, 7.47 m (24.5') Wet



Performance and Specifications

Dimensions

Dim-P4-38mm1.5in-CPP

Note: Dimensions vary by material and connection. For additional information, please refer to the P4 Plastic Manual.

Flow Curve – TPE-Fitted

Flo-P4-38mm1.5in-CPP

Note: Additional performance curves can be found in the P4 Plastic Manual.

AIR INLET
  • 1/2" FNPT

LIQUID INLET
  • 38 mm (1-1/2")

LIQUID DISCHARGE
  • 38 mm (1-1/2")

CONNECTION TYPE
  • DIN/ANSI (Flanged)

MAX FLOW RATE
  • Rubber – 348 lpm (92 gpm)

  • TPE – 354 lpm (94 gpm)

  • Full-Stroke PTFE – 352 lpm (92.9 gpm)

  • Reduced-Stroke PTFE – 261 lpm (69 gpm)

MAX PRESSURE
  • 8.6 bar (125 psi)

MAX DIAMETER SOLIDS
  • 4.8 mm (3/16'')

MAX SUCTION LIFT CAPABILITY
  • Rubber – 4.88 m (16') Dry, 7.92 m (26') Wet

  • TPE – 3.96 m (13') Dry, 7.92 m (26') Wet

  • Full-Stroke PTFE – 4.7 m (15.3') Dry, 9.3 m (30.6') Wet

  • Reduced-Stroke PTFE – 3.05 m (10') Dry, 7.47 m (24.5') Wet

DISPLACEMENT PER STROKE *
  • Rubber – 1.19 L (0.314 gal)

  • TPE – 1.18 L (0.311 gal)

  • Full-Stroke PTFE – 1.0 L (0.27 gal)

  • Reduced-Stroke PTFE – 0.53 L (0.139 gal)

  • * 1 cycle = 2 strokes

Wetted Housings

MaterialShip Wt
Polypropylene16.8 kg (37 lb)
PVDF21.3 kg (47 lb)

Non-Wetted Housings

DescriptionMaterial
Center BlockPolypropylene, Acetal
Air ValvePolypropylene, Acetal
Air ChamberAluminum, PTFE-Coated Aluminum, Acetal, Stainless Steel, Halar-Coated Aluminum


MAX FLOW RATE
  • Rubber – 348 lpm (92 gpm)

  • TPE – 354 lpm (94 gpm)

  • Full-Stroke PTFE – 352 lpm (92.9 gpm)

  • Reduced-Stroke PTFE – 261 lpm (69 gpm)

MAX PRESSURE
  • 8.6 bar (125 psi)

MAX DIAMETER SOLIDS
  • 4.8 mm (3/16'')

DISPLACEMENT PER STROKE *
  • Rubber – 1.19 L (0.314 gal)

  • TPE – 1.18 L (0.311 gal)

  • Full-Stroke PTFE – 1.0 L (0.27 gal)

  • Reduced-Stroke PTFE – 0.53 L (0.139 gal)

  • * 1 cycle = 2 strokes


Inquiry:

CATEGORIES

LATEST NEWS

CONTACT US

Contact: Amy

Phone: +86-17717557262

Tel: +86-17717557262

Email: shsaikun@gmail.com

Add: No. 133, Dongzheng Village, Lingang New Area, China (Shanghai) Pilot Free Trade Zone

Leave a message

Top