
| Item | 00-10060 |
|---|---|
| Model | P.025/PPPPP/EPS/TF/PTV |
| Series | Pro-Flo |
| Wetted material | Polypropylene |
| Diaphragm material | EPDM |
| Nominal model size | 1/4-inch |
| Actual fluid inlet / discharge size | 6 mm (1/4") |
WILDEN / PRO-FLO SERIES
00-10060 · 1/4-inch Polypropylene AODD Pump
This 1/4-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses polypropylene wetted housing and EPDM diaphragms. The configuration is identified by the complete ordering code below.
Complete model
P.025/PPPPP/EPS/TF/PTV
NOMINAL MODEL SIZE
1/4-inch
WETTED HOUSING
Polypropylene
DIAPHRAGM MATERIAL
EPDM
01Configuration
| Brand / item number | WILDEN / 00-10060 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P.025 |
| Nominal model size | 1/4-inch |
| Actual fluid inlet size | 6 mm (1/4") |
| Actual fluid discharge size | 6 mm (1/4") |
| Wetted housing | Polypropylene |
| Diaphragm material | EPDM |
| Check ball material | PTFE |
| Valve seat material | Polypropylene |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Polypropylene |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE-encapsulated FKM |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 00-10060 and P.025/PPPPP/EPS/TF/PTV and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 00-10060 and P.025/PPPPP/EPS/TF/PTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.