
| Item | 00-10182 |
|---|---|
| Model | PS25/PPPPP/ZWS/WF/PEP |
| Series | Pro-Flo SHIFT |
| Wetted material | Polypropylene |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Nominal model size | 1/4-inch |
| Construction | Bolted plastic |
| Actual fluid inlet / discharge size | 6 mm (1/4") |
WILDEN / PRO-FLO SHIFT SERIES
00-10182 · 1/4-inch Polypropylene AODD Pump
This 1/4-inch WILDEN Pro-Flo SHIFT air-operated double-diaphragm pump uses polypropylene wetted housing and Wil-Flex™ (Santoprene®) diaphragms. Its bolted plastic construction is identified by the complete ordering code below.
Complete model
PS25/PPPPP/ZWS/WF/PEP
NOMINAL MODEL SIZE
1/4-inch
WETTED HOUSING
Polypropylene
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®)
01Configuration
| Brand / item number | WILDEN / 00-10182 |
|---|---|
| Pump series | Pro-Flo SHIFT |
| Pump model code | PS25 |
| Nominal model size | 1/4-inch |
| Actual fluid inlet size | 6 mm (1/4") |
| Actual fluid discharge size | 6 mm (1/4") |
| Construction | Bolted plastic |
| Wetted housing | Polypropylene |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Polypropylene |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Polypropylene |
|---|---|
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | EPDM |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 00-10182 and PS25/PPPPP/ZWS/WF/PEP, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.