
| Item | 00-9737 |
|---|---|
| Model | P.025/AZPPP/TNL/TF/ATF/0014 |
| Series | Pro-Flo |
| Wetted material | Aluminum |
| Diaphragm material | PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring |
| Nominal model size | 1/4-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 6 mm (1/4") |
WILDEN / PRO-FLO SERIES
00-9737 · 1/4-inch Aluminum AODD Pump
This 1/4-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses aluminum wetted housing and PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
P.025/AZPPP/TNL/TF/ATF/0014
NOMINAL MODEL SIZE
1/4-inch
WETTED HOUSING
Aluminum
DIAPHRAGM MATERIAL
PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring
01Configuration
| Brand / item number | WILDEN / 00-9737 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P.025 |
| Nominal model size | 1/4-inch |
| Actual fluid inlet size | 6 mm (1/4") |
| Actual fluid discharge size | 6 mm (1/4") |
| Construction | Clamped metal |
| Wetted housing | Aluminum |
| Diaphragm material | PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring |
| Check ball material | PTFE |
| Valve seat material | Aluminum |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | No outer piston |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 00-9737 and P.025/AZPPP/TNL/TF/ATF/0014 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 00-9737 and P.025/AZPPP/TNL/TF/ATF/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.