
| Item | 01-10147 |
|---|---|
| Model | P1/SSPPP/WFS/WF/SWF/0014 |
| Series | Pro-Flo |
| Wetted material | Stainless steel |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Nominal model size | 1/2-inch |
| Connection standard | BSPT |
| Actual fluid inlet / discharge size | 13 mm (1/2") |
WILDEN / PRO-FLO SERIES
01-10147 · 1/2-inch Stainless steel AODD Pump
This 1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses stainless steel wetted housing and Wil-Flex™ (Santoprene®) diaphragms. The configuration is identified by the complete ordering code below. Fluid connections use the BSPT standard.
Complete model
P1/SSPPP/WFS/WF/SWF/0014
NOMINAL MODEL SIZE
1/2-inch BSPT
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®)
01Configuration
| Brand / item number | WILDEN / 01-10147 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P1 |
| Nominal model size | 1/2-inch |
| Actual fluid inlet size | 13 mm (1/2") |
| Actual fluid discharge size | 13 mm (1/2") |
| Wetted housing | Stainless steel |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Stainless steel |
| Connection standard | BSPT |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | Wil-Flex™ (Santoprene®) |
| Special option code | 0014 · BSPT threaded |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 01-9985-20 | KIT, AIR, P/0.5"/C/C/P |
| Wet kit | 01-9804-58 | KIT, WET, 0.5"/O/M/WFS |
Enquiry information
Quote 01-10147 and P1/SSPPP/WFS/WF/SWF/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.