WILDENAODD pumps, kits & parts
WILDEN 01-10220 P1/HHPPP/TNU/TF/HTF
Item 01-10220
Model P1/HHPPP/TNU/TF/HTF
Series Pro-Flo
Wetted material Alloy C
Diaphragm material PTFE with Neoprene back-up
Nominal model size 1/2-inch
Construction Clamped metal
Actual fluid inlet / discharge size 13 mm (1/2")

WILDEN / PRO-FLO SERIES

01-10220 · 1/2-inch Alloy C AODD Pump

This 1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses alloy c wetted housing and PTFE with Neoprene back-up diaphragms. Its clamped metal construction is identified by the complete ordering code below.

Complete model
P1/HHPPP/TNU/TF/HTF

NOMINAL MODEL SIZE

1/2-inch

MAXIMUM FLOW

54.4 L/min (14.4 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / 01-10220
Pump series Pro-Flo
Pump model code P1
Nominal model size 1/2-inch
Actual fluid inlet size 13 mm (1/2")
Actual fluid discharge size 13 mm (1/2")
Construction Clamped metal
Wetted housing Alloy C
Diaphragm material PTFE with Neoprene back-up
Check ball material PTFE
Valve seat material Alloy C

02Operating data

Maximum flow 54.4 L/min (14.4 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 1.59 mm (1/16")
Displacement per stroke 0.09 L (0.025 gal)
Listed suction lift Dry 4.9 m (16.0 ft), wet 9.5 m (31.0 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Alloy C
Air chambers Polypropylene
Center section Polypropylene
Air valve Polypropylene
Valve seat O-rings PTFE
Air inlet connection 6 mm (1/4")
P1 dimensional drawing
P1 M ETAL — dimensional drawing. Click to view the full-size image.

04Recommended repair kits

Kit type Item number Description
Air kit 01-9985-20 KIT, AIR, P/0.5"/C/C/P
Wet kit 01-9804-55 KIT, WET, 0.5"/O/M/TNU

Enquiry information

Quote 01-10220 and P1/HHPPP/TNU/TF/HTF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for 01-10220