
| Item | 01-10230 |
|---|---|
| Model | P1/KKPPP/WFS/TF/KWF |
| Series | Pro-Flo |
| Wetted material | PVDF |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Nominal model size | 1/2-inch |
| Construction | Clamped plastic |
| Actual fluid inlet / discharge size | 13 mm (1/2") |
WILDEN / PRO-FLO SERIES
01-10230 · 1/2-inch PVDF AODD Pump
This 1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses PVDF wetted housing and Wil-Flex™ (Santoprene®) diaphragms. Its clamped plastic construction is identified by the complete ordering code below.
Complete model
P1/KKPPP/WFS/TF/KWF
NOMINAL MODEL SIZE
1/2-inch
MAXIMUM FLOW
56.8 L/min (15 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 01-10230 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P1 |
| Nominal model size | 1/2-inch |
| Actual fluid inlet size | 13 mm (1/2") |
| Actual fluid discharge size | 13 mm (1/2") |
| Construction | Clamped plastic |
| Wetted housing | PVDF |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Check ball material | PTFE |
| Valve seat material | PVDF |
02Operating data
| Maximum flow | 56.8 L/min (15 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 1.6 mm (1/16") |
| Displacement per stroke | 0.11 L (0.030 gal) |
| Listed suction lift | Dry 5.8 m (19 ft), wet 9.8 m (32 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | PVDF |
|---|---|
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | Wil-Flex™ (Santoprene®) |
| Air inlet connection | 6 mm (1/4") |
04Performance curves
Use the trace for this diaphragm configuration.
Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 01-9985-20 | KIT, AIR, P/0.5"/C/C/P |
Enquiry information
Quote 01-10230 and P1/KKPPP/WFS/TF/KWF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.