
| Item | 01-10279 |
|---|---|
| Model | A1P/SSPPP/TNU/TF/STF/0151 |
| Series | Accu-Flo |
| Wetted material | Stainless steel |
| Diaphragm material | PTFE with Neoprene back-up |
| Nominal model size | 1/2-inch |
| Actual fluid inlet / discharge size | 13 mm (1/2") |
WILDEN / ACCU-FLO SERIES
01-10279 · 1/2-inch Stainless steel AODD Pump
This 1/2-inch WILDEN Accu-Flo air-operated double-diaphragm pump uses stainless steel wetted housing and PTFE with Neoprene back-up diaphragms. The configuration is identified by the complete ordering code below.
Complete model
A1P/SSPPP/TNU/TF/STF/0151
NOMINAL MODEL SIZE
1/2-inch
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
PTFE with Neoprene back-up
01Configuration
| Brand / item number | WILDEN / 01-10279 |
|---|---|
| Pump series | Accu-Flo |
| Pump model code | A1P |
| Nominal model size | 1/2-inch |
| Actual fluid inlet size | 13 mm (1/2") |
| Actual fluid discharge size | 13 mm (1/2") |
| Wetted housing | Stainless steel |
| Diaphragm material | PTFE with Neoprene back-up |
| Check ball material | PTFE |
| Valve seat material | Stainless steel |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE |
| Special option code | 0151 · Accu-Flo™, 24V AC / 12V DC coil |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Wet kit | 01-9804-55 | KIT, WET, 0.5"/O/M/TNU |
Enquiry information
Quote 01-10279 and A1P/SSPPP/TNU/TF/STF/0151, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.