
| Item | 01-10371 |
|---|---|
| Model | A1P/PPPPP/WFS/WF/KWF/0150 |
| Series | Accu-Flo |
| Wetted material | Polypropylene |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Nominal model size | 1/2-inch |
| Construction | Clamped plastic |
| Actual fluid inlet / discharge size | 13 mm (1/2") |
WILDEN / ACCU-FLO SERIES
01-10371 · 1/2-inch Polypropylene AODD Pump
This 1/2-inch WILDEN Accu-Flo air-operated double-diaphragm pump uses polypropylene wetted housing and Wil-Flex™ (Santoprene®) diaphragms. Its clamped plastic construction is identified by the complete ordering code below.
Complete model
A1P/PPPPP/WFS/WF/KWF/0150
NOMINAL MODEL SIZE
1/2-inch
WETTED HOUSING
Polypropylene
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®)
01Configuration
| Brand / item number | WILDEN / 01-10371 |
|---|---|
| Pump series | Accu-Flo |
| Pump model code | A1P |
| Nominal model size | 1/2-inch |
| Actual fluid inlet size | 13 mm (1/2") |
| Actual fluid discharge size | 13 mm (1/2") |
| Construction | Clamped plastic |
| Wetted housing | Polypropylene |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | PVDF |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Polypropylene |
|---|---|
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | Wil-Flex™ (Santoprene®) |
| Special option code | 0150 · Accu-Flo™, 24V DC coil |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Wet kit | 01-9805-58 | KIT, WET, 0.5"/O/P/WFS |
Enquiry information
Quote 01-10371 and A1P/PPPPP/WFS/WF/KWF/0150, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.