WILDENAODD pumps, kits & parts
WILDEN 01-10601 P1/AALLL/VTS/VT/STF
Item 01-10601
Model P1/AALLL/VTS/VT/STF
Series Pro-Flo
Wetted material Aluminum
Diaphragm material FKM
Nominal model size 1/2-inch
Construction Clamped metal
Actual fluid inlet / discharge size 13 mm (1/2")

WILDEN / PRO-FLO SERIES

01-10601 · 1/2-inch Aluminum AODD Pump

This 1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses aluminum wetted housing and FKM diaphragms. Its clamped metal construction is identified by the complete ordering code below.

Complete model
P1/AALLL/VTS/VT/STF

NOMINAL MODEL SIZE

1/2-inch

MAXIMUM FLOW

58.7 L/min (15.5 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / 01-10601
Pump series Pro-Flo
Pump model code P1
Nominal model size 1/2-inch
Actual fluid inlet size 13 mm (1/2")
Actual fluid discharge size 13 mm (1/2")
Construction Clamped metal
Wetted housing Aluminum
Diaphragm material FKM
Check ball material FKM
Valve seat material Stainless steel

02Operating data

Maximum flow 58.7 L/min (15.5 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 1.59 mm (1/16")
Displacement per stroke 0.11 L (0.029 gal)
Listed suction lift Dry 5.8 m (19.0 ft), wet 9.5 m (31.0 ft)
Listed shipping weight 6 kg (13 lb)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Aluminum
Center section Acetal
Air valve Acetal
Valve seat O-rings PTFE
Air inlet connection 6 mm (1/4")
P1 dimensional drawing
P1 M ETAL — dimensional drawing. Click to view the full-size image.

04Performance curves

P1 performance curve
P1 ME TA L performance curve — rubber diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote 01-10601 and P1/AALLL/VTS/VT/STF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for 01-10601