WILDENAODD pumps, kits & parts
WILDEN 01-10876 P1/PPPPP/TNU/TF/VT
Item 01-10876
Model P1/PPPPP/TNU/TF/VT
Series Pro-Flo
Wetted material Polypropylene
Diaphragm material PTFE with Neoprene back-up
Nominal model size 1/2-inch
Construction Clamped plastic
Actual fluid inlet / discharge size 13 mm (1/2")

WILDEN / PRO-FLO SERIES

01-10876 · 1/2-inch Polypropylene AODD Pump

This 1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses polypropylene wetted housing and PTFE with Neoprene back-up diaphragms. Its clamped plastic construction is identified by the complete ordering code below.

Complete model
P1/PPPPP/TNU/TF/VT

NOMINAL MODEL SIZE

1/2-inch

MAXIMUM FLOW

53.4 L/min (14.1 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / 01-10876
Pump series Pro-Flo
Pump model code P1
Nominal model size 1/2-inch
Actual fluid inlet size 13 mm (1/2")
Actual fluid discharge size 13 mm (1/2")
Construction Clamped plastic
Wetted housing Polypropylene
Diaphragm material PTFE with Neoprene back-up
Check ball material PTFE
Valve seat material FKM (Viton®)

02Operating data

Maximum flow 53.4 L/min (14.1 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 1.6 mm (1/16")
Displacement per stroke 0.10 L (0.027 gal)
Listed suction lift Dry 5.18 m (17 ft), wet 9.8 m (32 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Polypropylene
Air chambers Polypropylene
Center section Polypropylene
Air valve Polypropylene
Air inlet connection 6 mm (1/4")
P1 dimensional drawing
P1 Plastic — dimensional drawing. Click to view the full-size image.

04Recommended repair kits

Kit type Item number Description
Air kit 01-9985-20 KIT, AIR, P/0.5"/C/C/P

Enquiry information

Quote 01-10876 and P1/PPPPP/TNU/TF/VT, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for 01-10876