
| Item | 01-10941 |
|---|---|
| Model | P100/PZPPP/TNL/VT/KTV |
| Series | Pro-Flo |
| Wetted material | Polypropylene |
| Nominal model size | 1/2-inch |
| Construction | Bolted plastic |
| Actual fluid inlet / discharge size | 13 mm (1/2") |
WILDEN / PRO-FLO SERIES
01-10941 · 1/2-inch Polypropylene AODD Pump
This 1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses polypropylene wetted housing. Its bolted plastic construction is identified by the complete ordering code below.
Complete model
P100/PZPPP/TNL/VT/KTV
NOMINAL MODEL SIZE
1/2-inch
WETTED HOUSING
Polypropylene
ITEM
01-10941
01Configuration
| Brand / item number | WILDEN / 01-10941 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P100 |
| Nominal model size | 1/2-inch |
| Actual fluid inlet size | 13 mm (1/2") |
| Actual fluid discharge size | 13 mm (1/2") |
| Construction | Bolted plastic |
| Wetted housing | Polypropylene |
| Check ball material | FKM |
| Valve seat material | PVDF |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | No outer piston |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE-encapsulated FKM |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 01-9985-20 | KIT, AIR, P/0.5"/C/C/P |
Enquiry information
Quote 01-10941 and P100/PZPPP/TNL/VT/KTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.