
| Item | 01-11130 |
|---|---|
| Model | XP1/SSJJJ/TNL/TF/STF/0023 |
| Series | Pro-Flo |
| Wetted material | Stainless steel |
| Diaphragm material | PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring |
| Nominal model size | 1/2-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 13 mm (1/2") |
WILDEN / PRO-FLO SERIES
01-11130 · 1/2-inch Stainless steel AODD Pump
This 1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses stainless steel wetted housing and PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
XP1/SSJJJ/TNL/TF/STF/0023
NOMINAL MODEL SIZE
1/2-inch
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring
01Configuration
| Brand / item number | WILDEN / 01-11130 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | XP1 |
| Nominal model size | 1/2-inch |
| Actual fluid inlet size | 13 mm (1/2") |
| Actual fluid discharge size | 13 mm (1/2") |
| Construction | Clamped metal |
| Wetted housing | Stainless steel |
| Diaphragm material | PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring |
| Check ball material | PTFE |
| Valve seat material | Stainless steel |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Center section | Conductive polypropylene |
| Air valve | Conductive polypropylene |
| Valve seat O-rings | PTFE |
| Special option code | 0023 · Wing nuts |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 01-9985-20 | KIT, AIR, P/0.5"/C/C/P |
| Wet kit | 01-9804-55-213 | KIT, WET, 0.5"/O/M/TNL |
Enquiry information
Quote 01-11130 and XP1/SSJJJ/TNL/TF/STF/0023, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.