WILDENAODD pumps, kits & parts
WILDEN 01-11370 P100/PPPPP/VTS/TF/KTV
Item 01-11370
Model P100/PPPPP/VTS/TF/KTV
Series Pro-Flo
Wetted material Polypropylene
Diaphragm material FKM
Nominal model size 1/2-inch
Construction Bolted plastic
Actual fluid inlet / discharge size 13 mm (1/2")

WILDEN / PRO-FLO SERIES

01-11370 · 1/2-inch Polypropylene AODD Pump

This 1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses polypropylene wetted housing and FKM diaphragms. Its bolted plastic construction is identified by the complete ordering code below.

Complete model
P100/PPPPP/VTS/TF/KTV

NOMINAL MODEL SIZE

1/2-inch

MAXIMUM FLOW

56.0 L/min (14.8 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / 01-11370
Pump series Pro-Flo
Pump model code P100
Nominal model size 1/2-inch
Actual fluid inlet size 13 mm (1/2")
Actual fluid discharge size 13 mm (1/2")
Construction Bolted plastic
Wetted housing Polypropylene
Diaphragm material FKM
Check ball material PTFE
Valve seat material PVDF

02Operating data

Maximum flow 56.0 L/min (14.8 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 1.6 mm (1/16")
Displacement per stroke 0.10 L (0.027 gal)
Listed suction lift Dry 5.2 m (17.0 ft), wet 8.7 m (28.4 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Polypropylene
Center section Polypropylene
Air valve Polypropylene
Valve seat O-rings PTFE-encapsulated FKM
Air inlet connection 6 mm (1/4")
P100 dimensional drawing
P100 Advanced™ Plastic — dimensional drawing. Click to view the full-size image.

04Performance curves

P100 performance curve
P100 Plastic performance curve — rubber diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote 01-11370 and P100/PPPPP/VTS/TF/KTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for 01-11370