WILDENAODD pumps, kits & parts
WILDEN 01-11470 P1/PPPPP/VTS/VT/KTF
Item 01-11470
Model P1/PPPPP/VTS/VT/KTF
Series Pro-Flo
Wetted material Polypropylene
Diaphragm material FKM
Nominal model size 1/2-inch
Construction Clamped plastic
Actual fluid inlet / discharge size 13 mm (1/2")

WILDEN / PRO-FLO SERIES

01-11470 · 1/2-inch Polypropylene AODD Pump

This 1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses polypropylene wetted housing and FKM diaphragms. Its clamped plastic construction is identified by the complete ordering code below.

Complete model
P1/PPPPP/VTS/VT/KTF

NOMINAL MODEL SIZE

1/2-inch

MAXIMUM FLOW

56.0 L/min (14.8 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / 01-11470
Pump series Pro-Flo
Pump model code P1
Nominal model size 1/2-inch
Actual fluid inlet size 13 mm (1/2")
Actual fluid discharge size 13 mm (1/2")
Construction Clamped plastic
Wetted housing Polypropylene
Diaphragm material FKM
Check ball material FKM
Valve seat material PVDF

02Operating data

Maximum flow 56.0 L/min (14.8 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 1.6 mm (1/16")
Displacement per stroke 0.11 L (0.029 gal)
Listed suction lift Dry 6.1 m (20 ft), wet 9.5 m (31 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Polypropylene
Center section Polypropylene
Air valve Polypropylene
Valve seat O-rings PTFE
Air inlet connection 6 mm (1/4")
P1 dimensional drawing
P1 Plastic — dimensional drawing. Click to view the full-size image.

04Performance curves

P1 performance curve
P1 Plastic performance curve — rubber diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote 01-11470 and P1/PPPPP/VTS/VT/KTF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for 01-11470