
| Item | 01-11472 |
|---|---|
| Model | P1/PZPPP/TNL/TF/KTF |
| Series | Pro-Flo |
| Wetted material | Polypropylene |
| Diaphragm material | PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring |
| Nominal model size | 1/2-inch |
| Construction | Clamped plastic |
| Actual fluid inlet / discharge size | 13 mm (1/2") |
WILDEN / PRO-FLO SERIES
01-11472 · 1/2-inch Polypropylene AODD Pump
This 1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses polypropylene wetted housing and PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring diaphragms. Its clamped plastic construction is identified by the complete ordering code below.
Complete model
P1/PZPPP/TNL/TF/KTF
NOMINAL MODEL SIZE
1/2-inch
WETTED HOUSING
Polypropylene
DIAPHRAGM MATERIAL
PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring
01Configuration
| Brand / item number | WILDEN / 01-11472 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P1 |
| Nominal model size | 1/2-inch |
| Actual fluid inlet size | 13 mm (1/2") |
| Actual fluid discharge size | 13 mm (1/2") |
| Construction | Clamped plastic |
| Wetted housing | Polypropylene |
| Diaphragm material | PTFE integral piston diaphragm (IPD) with Neoprene back-up O-ring |
| Check ball material | PTFE |
| Valve seat material | PVDF |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | No outer piston |
|---|---|
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 01-11472 and P1/PZPPP/TNL/TF/KTF and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 01-11472 and P1/PZPPP/TNL/TF/KTF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.