
| Item | 02-10146 |
|---|---|
| Model | T2/PKPPB/WFS/WF/PTV/0404 |
| Series | WILDEN pump (T2) |
| Wetted material | Polypropylene |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Nominal model size | 1-inch |
| Construction | Clamped plastic |
| Actual fluid inlet / discharge size | 25 mm (1") |
WILDEN / OTHER PUMP MODELS
02-10146 · 1-inch Polypropylene AODD Pump
This 1-inch WILDEN T2 air-operated double-diaphragm pump uses polypropylene wetted housing and Wil-Flex™ (Santoprene®) diaphragms. Its clamped plastic construction is identified by the complete ordering code below.
Complete model
T2/PKPPB/WFS/WF/PTV/0404
NOMINAL MODEL SIZE
1-inch
WETTED HOUSING
Polypropylene
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®)
01Configuration
| Brand / item number | WILDEN / 02-10146 |
|---|---|
| Pump series | WILDEN pump (T2) |
| Pump model code | T2 |
| Nominal model size | 1-inch |
| Actual fluid inlet size | 25 mm (1") |
| Actual fluid discharge size | 25 mm (1") |
| Construction | Clamped plastic |
| Wetted housing | Polypropylene |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Polypropylene |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | PVDF |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Brass |
| Valve seat O-rings | PTFE-encapsulated FKM (Viton®) |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 02-10146 and T2/PKPPB/WFS/WF/PTV/0404 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 02-10146 and T2/PKPPB/WFS/WF/PTV/0404, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.