
| Item | 02-11037 |
|---|---|
| Model | A200P/PKPPP/TEU/TF/PTV/0360 |
| Series | Accu-Flo |
| Wetted material | Polypropylene |
| Diaphragm material | PTFE with EPDM back-up |
| Nominal model size | 1-inch |
| Construction | Bolted plastic |
| Connection standard | DIN |
| Actual fluid inlet / discharge size | 25 mm (1") |
WILDEN / ACCU-FLO SERIES
02-11037 · 1-inch Polypropylene AODD Pump
This 1-inch WILDEN Accu-Flo air-operated double-diaphragm pump uses polypropylene wetted housing and PTFE with EPDM back-up diaphragms. Its bolted plastic construction is identified by the complete ordering code below. Fluid connections use the DIN standard.
Complete model
A200P/PKPPP/TEU/TF/PTV/0360
NOMINAL MODEL SIZE
1-inch DIN
WETTED HOUSING
Polypropylene
DIAPHRAGM MATERIAL
PTFE with EPDM back-up
01Configuration
| Brand / item number | WILDEN / 02-11037 |
|---|---|
| Pump series | Accu-Flo |
| Pump model code | A200P |
| Nominal model size | 1-inch |
| Actual fluid inlet size | 25 mm (1") |
| Actual fluid discharge size | 25 mm (1") |
| Construction | Bolted plastic |
| Wetted housing | Polypropylene |
| Diaphragm material | PTFE with EPDM back-up |
| Check ball material | PTFE |
| Valve seat material | Polypropylene |
| Connection standard | DIN |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | PVDF |
|---|---|
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE-encapsulated FKM |
| Special option code | 0360 · Accu-Flo™, 24V DC coil, DIN flange |
04Performance curves
Use the trace for this diaphragm configuration.
Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Wet kit | 02-9815-55-204 | KIT, WET, 1"/A/P/TEU |
Enquiry information
Quote 02-11037 and A200P/PKPPP/TEU/TF/PTV/0360, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.