
| Item | 02-11280 |
|---|---|
| Model | T2/PPPB/TF/NE/PTV/400 |
| Series | Turbo-Flo |
| Wetted material | Polypropylene |
| Diaphragm material | PTFE |
| Nominal model size | 1-inch |
| Actual fluid inlet / discharge size | 25 mm (1") |
WILDEN / TURBO-FLO SERIES
02-11280 · 1-inch Polypropylene AODD Pump
This 1-inch WILDEN Turbo-Flo air-operated double-diaphragm pump uses polypropylene wetted housing and PTFE diaphragms. The configuration is identified by the complete ordering code below.
Complete model
T2/PPPB/TF/NE/PTV/400
NOMINAL MODEL SIZE
1-inch
MAXIMUM FLOW
102 L/min (26 US gpm)
DIAPHRAGM MATERIAL
PTFE
01Configuration
| Brand / item number | WILDEN / 02-11280 |
|---|---|
| Pump series | Turbo-Flo |
| Pump model code | T2 |
| Nominal model size | 1-inch |
| Actual fluid inlet size | 25 mm (1") |
| Actual fluid discharge size | 25 mm (1") |
| Wetted housing | Polypropylene |
| Diaphragm material | PTFE |
| Check ball material | Neoprene |
02Operating data
| Maximum flow | 102 L/min (26 US gpm) |
|---|
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Air chambers | Polypropylene |
|---|---|
| Center section | Polypropylene |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 02-11280 and T2/PPPB/TF/NE/PTV/400 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 02-11280 and T2/PPPB/TF/NE/PTV/400, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.