
| Item | 02-11300 |
|---|---|
| Model | P2/HPPP/WF/WF/HTF/721 |
| Series | Pro-Flo |
| Wetted material | Alloy C |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Nominal model size | 1-inch |
| Actual fluid inlet / discharge size | 25 mm (1") |
WILDEN / PRO-FLO SERIES
02-11300 · 1-inch Alloy C AODD Pump
This 1-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses alloy c wetted housing and Wil-Flex™ (Santoprene®) diaphragms. The configuration is identified by the complete ordering code below.
Complete model
P2/HPPP/WF/WF/HTF/721
NOMINAL MODEL SIZE
1-inch
MAXIMUM FLOW
171 L/min (45 US gpm)
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®)
01Configuration
| Brand / item number | WILDEN / 02-11300 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P2 |
| Nominal model size | 1-inch |
| Actual fluid inlet size | 25 mm (1") |
| Actual fluid discharge size | 25 mm (1") |
| Wetted housing | Alloy C |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Check ball material | Wil-Flex™ (Santoprene®) |
02Operating data
| Maximum flow | 171 L/min (45 US gpm) |
|---|
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Air chambers | Polypropylene |
|---|---|
| Center section | Polypropylene |
| Air valve | Polypropylene |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 02-11300 and P2/HPPP/WF/WF/HTF/721 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 02-11300 and P2/HPPP/WF/WF/HTF/721, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.