
| Item | 02-12192 |
|---|---|
| Model | A200P/KKPPP/TNU/TF/KTV/0150 |
| Series | Accu-Flo |
| Wetted material | PVDF |
| Diaphragm material | PTFE with Neoprene back-up |
| Nominal model size | 1-inch |
| Construction | Bolted plastic |
| Actual fluid inlet / discharge size | 25 mm (1") |
WILDEN / ACCU-FLO SERIES
02-12192 · 1-inch PVDF AODD Pump
This 1-inch WILDEN Accu-Flo air-operated double-diaphragm pump uses PVDF wetted housing and PTFE with Neoprene back-up diaphragms. Its bolted plastic construction is identified by the complete ordering code below.
Complete model
A200P/KKPPP/TNU/TF/KTV/0150
NOMINAL MODEL SIZE
1-inch
WETTED HOUSING
PVDF
DIAPHRAGM MATERIAL
PTFE with Neoprene back-up
01Configuration
| Brand / item number | WILDEN / 02-12192 |
|---|---|
| Pump series | Accu-Flo |
| Pump model code | A200P |
| Nominal model size | 1-inch |
| Actual fluid inlet size | 25 mm (1") |
| Actual fluid discharge size | 25 mm (1") |
| Construction | Bolted plastic |
| Wetted housing | PVDF |
| Diaphragm material | PTFE with Neoprene back-up |
| Check ball material | PTFE |
| Valve seat material | PVDF |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | PVDF |
|---|---|
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE-encapsulated FKM |
| Special option code | 0150 · Accu-Flo™, 24V DC coil |
04Performance curves
Use the trace for this diaphragm configuration.
Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Wet kit | 02-9815-55 | KIT, WET, 1"/A/P/TNU |
Enquiry information
Quote 02-12192 and A200P/KKPPP/TNU/TF/KTV/0150, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.