
| Item | 02-12771 |
|---|---|
| Model | P2/SZPPP/FWL/PU/SPU/2000 |
| Series | Pro-Flo |
| Wetted material | Stainless steel |
| Diaphragm material | Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD |
| Nominal model size | 1-inch |
| Construction | Clamped metal |
| Connection standard | NPT |
| Actual fluid inlet / discharge size | 25 mm (1") |
WILDEN / PRO-FLO SERIES
02-12771 · 1-inch Stainless steel AODD Pump
This 1-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses stainless steel wetted housing and Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD diaphragms. Its clamped metal construction is identified by the complete ordering code below. Fluid connections use the NPT standard.
Complete model
P2/SZPPP/FWL/PU/SPU/2000
NOMINAL MODEL SIZE
1-inch NPT
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD
01Configuration
| Brand / item number | WILDEN / 02-12771 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P2 |
| Nominal model size | 1-inch |
| Actual fluid inlet size | 25 mm (1") |
| Actual fluid discharge size | 25 mm (1") |
| Construction | Clamped metal |
| Wetted housing | Stainless steel |
| Diaphragm material | Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD |
| Check ball material | Polyurethane |
| Valve seat material | Stainless steel |
| Connection standard | NPT |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | No outer piston |
|---|---|
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | Polyurethane |
| Special option code | 2000 · NPT threaded |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 02-9985-20 | KIT, AIR, P/1"/C/C/P |
Enquiry information
Quote 02-12771 and P2/SZPPP/FWL/PU/SPU/2000, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.