
| Item | 02-13206 |
|---|---|
| Model | XPS220/AZAAA/FSL/FS/SFS |
| Series | Pro-Flo SHIFT |
| Wetted material | Aluminum |
| Diaphragm material | Full-stroke sanitary Saniflex™ (Hytrel®) IPD |
| Nominal model size | 1-inch |
| Construction | Bolted metal |
| Actual fluid inlet / discharge size | 25 mm (1") |
WILDEN / PRO-FLO SHIFT SERIES
02-13206 · 1-inch Aluminum AODD Pump
This 1-inch WILDEN Pro-Flo SHIFT air-operated double-diaphragm pump uses aluminum wetted housing and Full-stroke sanitary Saniflex™ (Hytrel®) IPD diaphragms. Its bolted metal construction is identified by the complete ordering code below.
Complete model
XPS220/AZAAA/FSL/FS/SFS
NOMINAL MODEL SIZE
1-inch
WETTED HOUSING
Aluminum
DIAPHRAGM MATERIAL
Full-stroke sanitary Saniflex™ (Hytrel®) IPD
01Configuration
| Brand / item number | WILDEN / 02-13206 |
|---|---|
| Pump series | Pro-Flo SHIFT |
| Pump model code | XPS220 |
| Nominal model size | 1-inch |
| Actual fluid inlet size | 25 mm (1") |
| Actual fluid discharge size | 25 mm (1") |
| Construction | Bolted metal |
| Wetted housing | Aluminum |
| Diaphragm material | Full-stroke sanitary Saniflex™ (Hytrel®) IPD |
| Check ball material | Saniflex™ (Hytrel®) |
| Valve seat material | Stainless steel |
| Connection type | Threaded |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | No outer piston |
|---|---|
| Center section | Aluminum |
| Air valve | Aluminum |
| Valve seat O-rings | Saniflex™ (Hytrel®) |
| Fluid connection type | Threaded |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 02-13206 and XPS220/AZAAA/FSL/FS/SFS and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 02-13206 and XPS220/AZAAA/FSL/FS/SFS, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.