
| Item | 02-13584 |
|---|---|
| Model | XP200/JKJJJ/TNU/TF/PTV/0504 |
| Series | Pro-Flo |
| Wetted material | Conductive polypropylene |
| Diaphragm material | PTFE with Neoprene back-up |
| Nominal model size | 1-inch |
| Construction | Bolted plastic |
| Connection standard | DIN |
| Actual fluid inlet / discharge size | 25 mm (1") |
WILDEN / PRO-FLO SERIES
02-13584 · 1-inch Conductive polypropylene AODD Pump
This 1-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses conductive polypropylene wetted housing and PTFE with Neoprene back-up diaphragms. Its bolted plastic construction is identified by the complete ordering code below. Fluid connections use the DIN standard.
Complete model
XP200/JKJJJ/TNU/TF/PTV/0504
NOMINAL MODEL SIZE
1-inch DIN
MAXIMUM FLOW
174 L/min (46 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 02-13584 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | XP200 |
| Nominal model size | 1-inch |
| Actual fluid inlet size | 25 mm (1") |
| Actual fluid discharge size | 25 mm (1") |
| Construction | Bolted plastic |
| Wetted housing | Conductive polypropylene |
| Diaphragm material | PTFE with Neoprene back-up |
| Check ball material | PTFE |
| Valve seat material | Polypropylene |
| Connection standard | DIN |
02Operating data
| Maximum flow | 174 L/min (46 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 4.76 mm (3/16") |
| Displacement per stroke | 0.22 L (0.057 gal) |
| Listed suction lift | Dry 2.4 m (7.9 ft), wet 9.4 m (31.0 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Valve seat O-rings | PTFE-encapsulated FKM |
|---|---|
| Air inlet connection | 6 mm (1/4") |
| Special option code | 0504 · DIN flange |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 02-13584 and XP200/JKJJJ/TNU/TF/PTV/0504 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 02-13584 and XP200/JKJJJ/TNU/TF/PTV/0504, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.