
| Item | 04-11359 |
|---|---|
| Model | P4/WMAPP/WFS/WF/WF/0480 |
| Series | Pro-Flo |
| Wetted material | Ductile iron |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Nominal model size | 1.5-inch |
| Actual fluid inlet / discharge size | 38 mm (1.5") |
WILDEN / PRO-FLO SERIES
04-11359 · 1.5-inch Ductile iron AODD Pump
This 1.5-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses ductile iron wetted housing and Wil-Flex™ (Santoprene®) diaphragms. The configuration is identified by the complete ordering code below.
Complete model
P4/WMAPP/WFS/WF/WF/0480
NOMINAL MODEL SIZE
1.5-inch
WETTED HOUSING
Ductile iron
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®)
01Configuration
| Brand / item number | WILDEN / 04-11359 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P4 |
| Nominal model size | 1.5-inch |
| Actual fluid inlet size | 38 mm (1.5") |
| Actual fluid discharge size | 38 mm (1.5") |
| Wetted housing | Ductile iron |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Wil-Flex™ (Santoprene®) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Mild steel |
|---|---|
| Air chambers | Aluminum |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Special option code | 0480 · PCM I™ pump cycle monitor (sensor and wires only) |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 04-9985-20 | KIT, AIR, P/1.5"-2"/C/C/P |
| Wet kit | 04-9804-58 | KIT, WET, 1.5"/C/M/WFS |
Enquiry information
Quote 04-11359 and P4/WMAPP/WFS/WF/WF/0480, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.