
| Item | 04-11669 |
|---|---|
| Model | P400/AAAPP/WFS/TF/STF |
| Series | Pro-Flo |
| Wetted material | Aluminum |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Nominal model size | 1-1/2-inch |
| Construction | Bolted metal |
| Actual fluid inlet / discharge size | 38 mm (1-1/2") |
WILDEN / PRO-FLO SERIES
04-11669 · 1-1/2-inch Aluminum AODD Pump
This 1-1/2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses aluminum wetted housing and Wil-Flex™ (Santoprene®) diaphragms. Its bolted metal construction is identified by the complete ordering code below.
Complete model
P400/AAAPP/WFS/TF/STF
NOMINAL MODEL SIZE
1-1/2-inch
MAXIMUM FLOW
409 L/min (108 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 04-11669 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P400 |
| Nominal model size | 1-1/2-inch |
| Actual fluid inlet size | 38 mm (1-1/2") |
| Actual fluid discharge size | 38 mm (1-1/2") |
| Construction | Bolted metal |
| Wetted housing | Aluminum |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Check ball material | PTFE |
| Valve seat material | Stainless steel |
02Operating data
| Maximum flow | 409 L/min (108 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 7.9 mm (5/16") |
| Displacement per stroke | 1.14 L (0.30 gal) |
| Listed suction lift | Dry 3.9 m (13.0 ft), wet 8.9 m (29.5 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Aluminum |
|---|---|
| Air chambers | Aluminum |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE |
| Air inlet connection | 13 mm (1/2") |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 04-11669 and P400/AAAPP/WFS/TF/STF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.