
| Item | 04-12376 |
|---|---|
| Model | XPX420/SSAAA/TEU/TF/STF |
| Series | Pro-Flo X |
| Wetted material | Stainless steel |
| Diaphragm material | PTFE with EPDM back-up |
| Nominal model size | 1-1/2-inch |
| Construction | Bolted metal |
| Actual fluid inlet / discharge size | 38 mm (1-1/2") |
WILDEN / PRO-FLO X SERIES
04-12376 · 1-1/2-inch Stainless steel AODD Pump
This 1-1/2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses stainless steel wetted housing and PTFE with EPDM back-up diaphragms. Its bolted metal construction is identified by the complete ordering code below.
Complete model
XPX420/SSAAA/TEU/TF/STF
NOMINAL MODEL SIZE
1-1/2-inch
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
PTFE with EPDM back-up
01Configuration
| Brand / item number | WILDEN / 04-12376 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | XPX420 |
| Nominal model size | 1-1/2-inch |
| Actual fluid inlet size | 38 mm (1-1/2") |
| Actual fluid discharge size | 38 mm (1-1/2") |
| Construction | Bolted metal |
| Wetted housing | Stainless steel |
| Diaphragm material | PTFE with EPDM back-up |
| Check ball material | PTFE |
| Valve seat material | Stainless steel |
| Connection type | Threaded |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Valve seat O-rings | PTFE |
| Fluid connection type | Threaded |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 04-12376 and XPX420/SSAAA/TEU/TF/STF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.