
| Item | 04-12429 |
|---|---|
| Model | XPX4/WWAAA/EPU/EP/EP |
| Series | Pro-Flo X |
| Wetted material | Cast iron |
| Diaphragm material | EPDM Ultra-Flex™ |
| Nominal model size | 1.5-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 38 mm (1.5") |
WILDEN / PRO-FLO X SERIES
04-12429 · 1.5-inch Cast iron AODD Pump
This 1.5-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses cast iron wetted housing and EPDM Ultra-Flex™ diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
XPX4/WWAAA/EPU/EP/EP
NOMINAL MODEL SIZE
1.5-inch
WETTED HOUSING
Cast iron
DIAPHRAGM MATERIAL
EPDM Ultra-Flex™
01Configuration
| Brand / item number | WILDEN / 04-12429 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | XPX4 |
| Nominal model size | 1.5-inch |
| Actual fluid inlet size | 38 mm (1.5") |
| Actual fluid discharge size | 38 mm (1.5") |
| Construction | Clamped metal |
| Wetted housing | Cast iron |
| Diaphragm material | EPDM Ultra-Flex™ |
| Check ball material | EPDM |
| Valve seat material | EPDM |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Cast iron |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 04-12429 and XPX4/WWAAA/EPU/EP/EP and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 04-12429 and XPX4/WWAAA/EPU/EP/EP, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.