
| Item | 04-12548 |
|---|---|
| Model | PX400/KKPPP/TEU/TF/KTV/0504 |
| Series | Pro-Flo X |
| Wetted material | PVDF |
| Diaphragm material | PTFE with EPDM back-up |
| Nominal model size | 1-1/2-inch |
| Construction | Bolted plastic |
| Connection standard | DIN |
| Actual fluid inlet / discharge size | 38 mm (1-1/2") |
WILDEN / PRO-FLO X SERIES
04-12548 · 1-1/2-inch PVDF AODD Pump
This 1-1/2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses PVDF wetted housing and PTFE with EPDM back-up diaphragms. Its bolted plastic construction is identified by the complete ordering code below. Fluid connections use the DIN standard.
Complete model
PX400/KKPPP/TEU/TF/KTV/0504
NOMINAL MODEL SIZE
1-1/2-inch DIN
WETTED HOUSING
PVDF
DIAPHRAGM MATERIAL
PTFE with EPDM back-up
01Configuration
| Brand / item number | WILDEN / 04-12548 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | PX400 |
| Nominal model size | 1-1/2-inch |
| Actual fluid inlet size | 38 mm (1-1/2") |
| Actual fluid discharge size | 38 mm (1-1/2") |
| Construction | Bolted plastic |
| Wetted housing | PVDF |
| Diaphragm material | PTFE with EPDM back-up |
| Check ball material | PTFE |
| Valve seat material | PVDF |
| Connection standard | DIN |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | PVDF |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE-encapsulated FKM (Viton®) |
| Special option code | 0504 · DIN flange |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 04-12548 and PX400/KKPPP/TEU/TF/KTV/0504 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 04-12548 and PX400/KKPPP/TEU/TF/KTV/0504, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.