
| Item | 04-12556 |
|---|---|
| Model | XPX4/AAAAA/EPU/EP/EP/0014 |
| Series | Pro-Flo X |
| Wetted material | Aluminum |
| Diaphragm material | EPDM Ultra-Flex™ |
| Nominal model size | 1.5-inch |
| Construction | Clamped metal |
| Connection standard | BSP |
| Actual fluid inlet / discharge size | 38 mm (1.5") |
WILDEN / PRO-FLO X SERIES
04-12556 · 1.5-inch Aluminum AODD Pump
This 1.5-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses aluminum wetted housing and EPDM Ultra-Flex™ diaphragms. Its clamped metal construction is identified by the complete ordering code below. Fluid connections use the BSP standard.
Complete model
XPX4/AAAAA/EPU/EP/EP/0014
NOMINAL MODEL SIZE
1.5-inch BSP
WETTED HOUSING
Aluminum
DIAPHRAGM MATERIAL
EPDM Ultra-Flex™
01Configuration
| Brand / item number | WILDEN / 04-12556 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | XPX4 |
| Nominal model size | 1.5-inch |
| Actual fluid inlet size | 38 mm (1.5") |
| Actual fluid discharge size | 38 mm (1.5") |
| Construction | Clamped metal |
| Wetted housing | Aluminum |
| Diaphragm material | EPDM Ultra-Flex™ |
| Check ball material | EPDM |
| Valve seat material | EPDM |
| Connection standard | BSP |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Aluminum |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Special option code | 0014 · BSP threaded |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 04-12556 and XPX4/AAAAA/EPU/EP/EP/0014 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 04-12556 and XPX4/AAAAA/EPU/EP/EP/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.