
| Item | 04-12595 |
|---|---|
| Model | XPX400/AAAAA/TWS/TF/ATF |
| Series | Pro-Flo X |
| Wetted material | Aluminum |
| Diaphragm material | Full-stroke PTFE with Wil-Flex™ back-up |
| Nominal model size | 1-1/2-inch |
| Construction | Bolted metal |
| Actual fluid inlet / discharge size | 38 mm (1-1/2") |
WILDEN / PRO-FLO X SERIES
04-12595 · 1-1/2-inch Aluminum AODD Pump
This 1-1/2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses aluminum wetted housing and Full-stroke PTFE with Wil-Flex™ back-up diaphragms. Its bolted metal construction is identified by the complete ordering code below.
Complete model
XPX400/AAAAA/TWS/TF/ATF
NOMINAL MODEL SIZE
1-1/2-inch
WETTED HOUSING
Aluminum
DIAPHRAGM MATERIAL
Full-stroke PTFE with Wil-Flex™ back-up
01Configuration
| Brand / item number | WILDEN / 04-12595 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | XPX400 |
| Nominal model size | 1-1/2-inch |
| Actual fluid inlet size | 38 mm (1-1/2") |
| Actual fluid discharge size | 38 mm (1-1/2") |
| Construction | Bolted metal |
| Wetted housing | Aluminum |
| Diaphragm material | Full-stroke PTFE with Wil-Flex™ back-up |
| Check ball material | PTFE |
| Valve seat material | Aluminum |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Aluminum |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Valve seat O-rings | PTFE |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 04-12595 and XPX400/AAAAA/TWS/TF/ATF and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 04-12595 and XPX400/AAAAA/TWS/TF/ATF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.