
| Item | 04-12632 |
|---|---|
| Model | PX4/SSSPP/FWS/FS/FS/0070 |
| Series | Pro-Flo X |
| Wetted material | Stainless steel |
| Diaphragm material | Sanitary Wil-Flex™ (Santoprene®) EZ-Install |
| Nominal model size | 1.5-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 38 mm (1.5") |
WILDEN / PRO-FLO X SERIES
04-12632 · 1.5-inch Stainless steel AODD Pump
This 1.5-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses stainless steel wetted housing and Sanitary Wil-Flex™ (Santoprene®) EZ-Install diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
PX4/SSSPP/FWS/FS/FS/0070
NOMINAL MODEL SIZE
1.5-inch
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
Sanitary Wil-Flex™ (Santoprene®) EZ-Install
01Configuration
| Brand / item number | WILDEN / 04-12632 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | PX4 |
| Nominal model size | 1.5-inch |
| Actual fluid inlet size | 38 mm (1.5") |
| Actual fluid discharge size | 38 mm (1.5") |
| Construction | Clamped metal |
| Wetted housing | Stainless steel |
| Diaphragm material | Sanitary Wil-Flex™ (Santoprene®) EZ-Install |
| Check ball material | Saniflex™ (Hytrel®) |
| Valve seat material | Saniflex™ (Hytrel®) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Stainless steel |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Special option code | 0070 · Saniflo™ FDA |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 04-12632 and PX4/SSSPP/FWS/FS/FS/0070 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 04-12632 and PX4/SSSPP/FWS/FS/FS/0070, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.