
| Item | 04-12757 |
|---|---|
| Model | PX400/PPPPP/FWS/WF/PWF |
| Series | Pro-Flo X |
| Wetted material | Polypropylene |
| Diaphragm material | Sanitary Wil-Flex™ (Santoprene®) EZ-Install |
| Nominal model size | 1-1/2-inch |
| Construction | Bolted plastic |
| Actual fluid inlet / discharge size | 38 mm (1-1/2") |
WILDEN / PRO-FLO X SERIES
04-12757 · 1-1/2-inch Polypropylene AODD Pump
This 1-1/2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses polypropylene wetted housing and Sanitary Wil-Flex™ (Santoprene®) EZ-Install diaphragms. Its bolted plastic construction is identified by the complete ordering code below.
Complete model
PX400/PPPPP/FWS/WF/PWF
NOMINAL MODEL SIZE
1-1/2-inch
WETTED HOUSING
Polypropylene
DIAPHRAGM MATERIAL
Sanitary Wil-Flex™ (Santoprene®) EZ-Install
01Configuration
| Brand / item number | WILDEN / 04-12757 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | PX400 |
| Nominal model size | 1-1/2-inch |
| Actual fluid inlet size | 38 mm (1-1/2") |
| Actual fluid discharge size | 38 mm (1-1/2") |
| Construction | Bolted plastic |
| Wetted housing | Polypropylene |
| Diaphragm material | Sanitary Wil-Flex™ (Santoprene®) EZ-Install |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Polypropylene |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Polypropylene |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | Wil-Flex™ (Santoprene®) |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 04-12757 and PX400/PPPPP/FWS/WF/PWF and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 04-12757 and PX400/PPPPP/FWS/WF/PWF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.