WILDENAODD pumps, kits & parts
WILDEN 04-13094 PX4/PPAPP/EPS/EP/PTV
Item 04-13094
Model PX4/PPAPP/EPS/EP/PTV
Series Pro-Flo X
Wetted material Polypropylene
Diaphragm material EPDM
Nominal model size 1-1/2-inch
Construction Clamped plastic
Actual fluid inlet / discharge size 38 mm (1-1/2")

WILDEN / PRO-FLO X SERIES

04-13094 · 1-1/2-inch Polypropylene AODD Pump

This 1-1/2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses polypropylene wetted housing and EPDM diaphragms. Its clamped plastic construction is identified by the complete ordering code below.

Complete model
PX4/PPAPP/EPS/EP/PTV

NOMINAL MODEL SIZE

1-1/2-inch

MAXIMUM FLOW

363 L/min (96 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / 04-13094
Pump series Pro-Flo X
Pump model code PX4
Nominal model size 1-1/2-inch
Actual fluid inlet size 38 mm (1-1/2")
Actual fluid discharge size 38 mm (1-1/2")
Construction Clamped plastic
Wetted housing Polypropylene
Diaphragm material EPDM
Check ball material EPDM
Valve seat material Polypropylene

02Operating data

Maximum flow 363 L/min (96 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 4.8 mm (3/16")
Listed suction lift Dry 5.7 m (18.7 ft), wet 8.6 m (28.4 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Polypropylene
Air chambers Aluminum
Center section Polypropylene
Air valve Polypropylene
Valve seat O-rings PTFE-encapsulated FKM (Viton®)
Air inlet connection 19 mm (3/4")
PX4 dimensional drawing
P X4 Pl As T I C — dimensional drawing. Click to view the full-size image.

04Performance curves

PX4 performance curve
PX4 Plastic Rubber-fitted performance curve — rubber diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote 04-13094 and PX4/PPAPP/EPS/EP/PTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for 04-13094