
| Item | 04-13431 |
|---|---|
| Model | PX4/PPAPP/PUS/PU/PTV |
| Series | Pro-Flo X |
| Wetted material | Polypropylene |
| Diaphragm material | Polyurethane |
| Nominal model size | 1-1/2-inch |
| Construction | Clamped plastic |
| Actual fluid inlet / discharge size | 38 mm (1-1/2") |
WILDEN / PRO-FLO X SERIES
04-13431 · 1-1/2-inch Polypropylene AODD Pump
This 1-1/2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses polypropylene wetted housing and Polyurethane diaphragms. Its clamped plastic construction is identified by the complete ordering code below.
Complete model
PX4/PPAPP/PUS/PU/PTV
NOMINAL MODEL SIZE
1-1/2-inch
MAXIMUM FLOW
363 L/min (96 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 04-13431 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | PX4 |
| Nominal model size | 1-1/2-inch |
| Actual fluid inlet size | 38 mm (1-1/2") |
| Actual fluid discharge size | 38 mm (1-1/2") |
| Construction | Clamped plastic |
| Wetted housing | Polypropylene |
| Diaphragm material | Polyurethane |
| Check ball material | Polyurethane |
| Valve seat material | Polypropylene |
02Operating data
| Maximum flow | 363 L/min (96 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 4.8 mm (3/16") |
| Displacement per stroke | 1.1 L (0.29 gal) |
| Listed suction lift | Dry 4.8 m (15.9 ft), wet 9.2 m (30.1 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Polypropylene |
|---|---|
| Air chambers | Aluminum |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE-encapsulated FKM (Viton®) |
| Air inlet connection | 19 mm (3/4") |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 04-13431 and PX4/PPAPP/PUS/PU/PTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.