
| Item | 04-14251 |
|---|---|
| Model | P4/WMAPP/ZWS/TF/WF |
| Series | Pro-Flo |
| Wetted material | Ductile iron |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Nominal model size | 1.5-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 38 mm (1.5") |
WILDEN / PRO-FLO SERIES
04-14251 · 1.5-inch Ductile iron AODD Pump
This 1.5-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses ductile iron wetted housing and Wil-Flex™ (Santoprene®) EZ-Install diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
P4/WMAPP/ZWS/TF/WF
NOMINAL MODEL SIZE
1.5-inch
WETTED HOUSING
Ductile iron
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®) EZ-Install
01Configuration
| Brand / item number | WILDEN / 04-14251 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P4 |
| Nominal model size | 1.5-inch |
| Actual fluid inlet size | 38 mm (1.5") |
| Actual fluid discharge size | 38 mm (1.5") |
| Construction | Clamped metal |
| Wetted housing | Ductile iron |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Check ball material | PTFE |
| Valve seat material | Wil-Flex™ (Santoprene®) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Mild steel |
|---|---|
| Air chambers | Aluminum |
| Center section | Polypropylene |
| Air valve | Polypropylene |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 04-14251 and P4/WMAPP/ZWS/TF/WF and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 04-14251 and P4/WMAPP/ZWS/TF/WF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.