
| Item | 04-14308 |
|---|---|
| Model | XPS430/AAAAA/ZPS/BN/BN |
| Series | Pro-Flo SHIFT |
| Wetted material | Aluminum |
| Diaphragm material | Polyurethane EZ-Install |
| Nominal model size | 1-1/2-inch |
| Construction | Bolted metal |
| Actual fluid inlet / discharge size | 38 mm (1-1/2") |
WILDEN / PRO-FLO SHIFT SERIES
04-14308 · 1-1/2-inch Aluminum AODD Pump
This 1-1/2-inch WILDEN Pro-Flo SHIFT air-operated double-diaphragm pump uses aluminum wetted housing and Polyurethane EZ-Install diaphragms. Its bolted metal construction is identified by the complete ordering code below.
Complete model
XPS430/AAAAA/ZPS/BN/BN
NOMINAL MODEL SIZE
1-1/2-inch
MAXIMUM FLOW
510 L/min (135 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 04-14308 |
|---|---|
| Pump series | Pro-Flo SHIFT |
| Pump model code | XPS430 |
| Nominal model size | 1-1/2-inch |
| Actual fluid inlet size | 38 mm (1-1/2") |
| Actual fluid discharge size | 38 mm (1-1/2") |
| Construction | Bolted metal |
| Wetted housing | Aluminum |
| Diaphragm material | Polyurethane EZ-Install |
| Check ball material | Buna-N |
| Valve seat material | Buna-N |
| Connection type | Flanged |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
| Maximum flow | 510 L/min (135 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 6.4 mm (1/4") |
| Listed suction lift | Dry 5.9 m (19.5 ft), wet 8.3 m (27.2 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Aluminum |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Air inlet connection | 3/4" |
| Fluid connection type | Flanged |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 04-14308 and XPS430/AAAAA/ZPS/BN/BN, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.