
| Item | 04-14321 |
|---|---|
| Model | P400/KKPPP/ZWS/WF/KWF/0504 |
| Series | Pro-Flo |
| Wetted material | PVDF |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Nominal model size | 1.5-inch |
| Construction | Bolted plastic |
| Connection standard | DIN |
| Actual fluid inlet / discharge size | 38 mm (1.5") |
WILDEN / PRO-FLO SERIES
04-14321 · 1.5-inch PVDF AODD Pump
This 1.5-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses PVDF wetted housing and Wil-Flex™ (Santoprene®) EZ-Install diaphragms. Its bolted plastic construction is identified by the complete ordering code below. Fluid connections use the DIN standard.
Complete model
P400/KKPPP/ZWS/WF/KWF/0504
NOMINAL MODEL SIZE
1.5-inch DIN
WETTED HOUSING
PVDF
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®) EZ-Install
01Configuration
| Brand / item number | WILDEN / 04-14321 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P400 |
| Nominal model size | 1.5-inch |
| Actual fluid inlet size | 38 mm (1.5") |
| Actual fluid discharge size | 38 mm (1.5") |
| Construction | Bolted plastic |
| Wetted housing | PVDF |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | PVDF |
| Connection standard | DIN |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | PVDF |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | Wil-Flex™ (Santoprene®) |
| Special option code | 0504 · DIN flange |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 04-14321 and P400/KKPPP/ZWS/WF/KWF/0504 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 04-14321 and P400/KKPPP/ZWS/WF/KWF/0504, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.