
| Item | 08-11199 |
|---|---|
| Model | T8/PKSPB/TNU/TF/PTV |
| Series | Turbo-Flo |
| Wetted material | Polypropylene |
| Diaphragm material | PTFE with Neoprene back-up |
| Nominal model size | 2-inch |
| Construction | Clamped plastic |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / TURBO-FLO SERIES
08-11199 · 2-inch Polypropylene AODD Pump
This 2-inch WILDEN Turbo-Flo air-operated double-diaphragm pump uses polypropylene wetted housing and PTFE with Neoprene back-up diaphragms. Its clamped plastic construction is identified by the complete ordering code below.
Complete model
T8/PKSPB/TNU/TF/PTV
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
458 L/min (121 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-11199 |
|---|---|
| Pump series | Turbo-Flo |
| Pump model code | T8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped plastic |
| Wetted housing | Polypropylene |
| Diaphragm material | PTFE with Neoprene back-up |
| Check ball material | PTFE |
| Valve seat material | Polypropylene |
02Operating data
| Maximum flow | 458 L/min (121 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 6.4 mm (1/4") |
| Displacement per stroke | 1.51 L (0.40 gal) |
| Listed suction lift | Dry 3.1 m (10 ft), wet 9.5 m (31 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | PVDF |
|---|---|
| Air chambers | Stainless steel |
| Center section | Polypropylene |
| Air valve | Brass |
| Valve seat O-rings | PTFE-encapsulated FKM (Viton®) |
| Air inlet connection | 19 mm (3/4") |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 08-11199 and T8/PKSPB/TNU/TF/PTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.