
| Item | 08-11299 |
|---|---|
| Model | T8/SSSSS/VTS/TF/VT |
| Series | Turbo-Flo |
| Wetted material | Stainless steel |
| Diaphragm material | FKM (Viton®) |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / TURBO-FLO SERIES
08-11299 · 2-inch Stainless steel AODD Pump
This 2-inch WILDEN Turbo-Flo air-operated double-diaphragm pump uses stainless steel wetted housing and FKM (Viton®) diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
T8/SSSSS/VTS/TF/VT
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
617 L/min (163 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-11299 |
|---|---|
| Pump series | Turbo-Flo |
| Pump model code | T8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped metal |
| Wetted housing | Stainless steel |
| Diaphragm material | FKM (Viton®) |
| Check ball material | PTFE |
| Valve seat material | FKM (Viton®) |
02Operating data
| Maximum flow | 617 L/min (163 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 6.4 mm (1/4") |
| Displacement per stroke | 2.69 L (0.71 gal) |
| Listed suction lift | Dry 6.4 m (21 ft), wet 9.5 m (31 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Stainless steel |
| Center section | Stainless steel |
| Air valve | Stainless steel |
| Air inlet connection | 19 mm (3/4") |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 08-11299 and T8/SSSSS/VTS/TF/VT, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.