
| Item | 08-11816 |
|---|---|
| Model | T8/SSSSS/FSS/FS/FS/0070 |
| Series | Turbo-Flo |
| Wetted material | Stainless steel |
| Diaphragm material | Saniflex™ (Hytrel®) |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / TURBO-FLO SERIES
08-11816 · 2-inch Stainless steel AODD Pump
This 2-inch WILDEN Turbo-Flo air-operated double-diaphragm pump uses stainless steel wetted housing and Saniflex™ (Hytrel®) diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
T8/SSSSS/FSS/FS/FS/0070
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
613 L/min (162 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-11816 |
|---|---|
| Pump series | Turbo-Flo |
| Pump model code | T8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped metal |
| Wetted housing | Stainless steel |
| Diaphragm material | Saniflex™ (Hytrel®) |
| Check ball material | Saniflex™ (Hytrel®) |
| Valve seat material | Saniflex™ (Hytrel®) |
02Operating data
| Maximum flow | 613 L/min (162 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 6.4 mm (1/4") |
| Displacement per stroke | 2.80 L (0.74 gal) |
| Listed suction lift | Dry 6.1 m (20 ft), wet 9.5 m (31 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Stainless steel |
| Center section | Stainless steel |
| Air valve | Stainless steel |
| Air inlet connection | 19 mm (3/4") |
| Special option code | 0070 · Saniflo™ FDA |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 08-11816 and T8/SSSSS/FSS/FS/FS/0070, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.