
| Item | 08-12819 |
|---|---|
| Model | P8/HHSPP/EPS/EP/EP |
| Series | Pro-Flo |
| Wetted material | Alloy C |
| Diaphragm material | EPDM |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO SERIES
08-12819 · 2-inch Alloy C AODD Pump
This 2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses alloy c wetted housing and EPDM diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
P8/HHSPP/EPS/EP/EP
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
623 L/min (165 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-12819 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped metal |
| Wetted housing | Alloy C |
| Diaphragm material | EPDM |
| Check ball material | EPDM |
| Valve seat material | EPDM |
02Operating data
| Maximum flow | 623 L/min (165 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 6.4 mm (1/4") |
| Displacement per stroke | 2.6 L (0.70 gal) |
| Listed suction lift | Dry 6.9 m (22.7 ft), wet 8.6 m (28.4 ft) |
| Listed shipping weight | 52 kg (114 lb) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Alloy C |
|---|---|
| Air chambers | Stainless steel |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Air inlet connection | 13 mm (1/2") |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 08-12819 and P8/HHSPP/EPS/EP/EP and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 08-12819 and P8/HHSPP/EPS/EP/EP, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.