
| Item | 08-13456 |
|---|---|
| Model | PX800/PKPAA/NEU/WF/PWF |
| Series | Pro-Flo X |
| Wetted material | Polypropylene |
| Diaphragm material | Neoprene Ultra-Flex™ |
| Nominal model size | 2-inch |
| Construction | Bolted plastic |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO X SERIES
08-13456 · 2-inch Polypropylene AODD Pump
This 2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses polypropylene wetted housing and Neoprene Ultra-Flex™ diaphragms. Its bolted plastic construction is identified by the complete ordering code below.
Complete model
PX800/PKPAA/NEU/WF/PWF
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
632 L/min (167 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-13456 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | PX800 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Bolted plastic |
| Wetted housing | Polypropylene |
| Diaphragm material | Neoprene Ultra-Flex™ |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Polypropylene |
02Operating data
| Maximum flow | 632 L/min (167 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Displacement per stroke | 1.7 L (0.45 gal) |
| Listed suction lift | Dry 4.8 m (15.9 ft), wet 7.9 m (26.1 ft) |
| Listed shipping weight | 33 kg (70 lb) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | PVDF |
|---|---|
| Air chambers | Polypropylene |
| Center section | Aluminum |
| Air valve | Aluminum |
| Valve seat O-rings | Wil-Flex™ (Santoprene®) |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 08-13456 and PX800/PKPAA/NEU/WF/PWF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.