
| Item | 08-13812 |
|---|---|
| Model | PX800/KKPPP/TSU/TF/KTV |
| Series | Pro-Flo X |
| Wetted material | PVDF |
| Diaphragm material | PTFE with Saniflex™ back-up |
| Nominal model size | 2-inch |
| Construction | Bolted plastic |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO X SERIES
08-13812 · 2-inch PVDF AODD Pump
This 2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses PVDF wetted housing and PTFE with Saniflex™ back-up diaphragms. Its bolted plastic construction is identified by the complete ordering code below.
Complete model
PX800/KKPPP/TSU/TF/KTV
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
579 L/min (153 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-13812 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | PX800 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Bolted plastic |
| Wetted housing | PVDF |
| Diaphragm material | PTFE with Saniflex™ back-up |
| Check ball material | PTFE |
| Valve seat material | PVDF |
02Operating data
| Maximum flow | 579 L/min (153 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Displacement per stroke | 1.7 L (0.46 gal) |
| Listed suction lift | Dry 4.5 m (14.8 ft), wet 7.2 m (23.8 ft) |
| Listed shipping weight | 45 kg (99 lb) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | PVDF |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE-encapsulated FKM (Viton®) |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 08-13812 and PX800/KKPPP/TSU/TF/KTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.