
| Item | 08-14026 |
|---|---|
| Model | XPX8/SSSSS/EPS/EP/EP/0014 |
| Series | Pro-Flo X |
| Wetted material | Stainless steel |
| Diaphragm material | EPDM |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Connection standard | BSP |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO X SERIES
08-14026 · 2-inch Stainless steel AODD Pump
This 2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses stainless steel wetted housing and EPDM diaphragms. Its clamped metal construction is identified by the complete ordering code below. Fluid connections use the BSP standard.
Complete model
XPX8/SSSSS/EPS/EP/EP/0014
NOMINAL MODEL SIZE
2-inch BSP
MAXIMUM FLOW
667 L/min (176 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-14026 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | XPX8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped metal |
| Wetted housing | Stainless steel |
| Diaphragm material | EPDM |
| Check ball material | EPDM |
| Valve seat material | EPDM |
| Connection standard | BSP |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
| Maximum flow | 667 L/min (176 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Displacement per stroke | 2.7 L (0.72 gal) |
| Listed shipping weight | 53 kg (117 lb) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Stainless steel |
| Center section | Stainless steel |
| Air valve | Stainless steel |
| Special option code | 0014 · BSP threaded |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 08-14026 and XPX8/SSSSS/EPS/EP/EP/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.