
| Item | 08-14115 |
|---|---|
| Model | XPX8/SSAAA/NEU/NE/NE/0320 |
| Series | Pro-Flo X |
| Wetted material | Stainless steel |
| Diaphragm material | Neoprene Ultra-Flex™ |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO X SERIES
08-14115 · 2-inch Stainless steel AODD Pump
This 2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses stainless steel wetted housing and Neoprene Ultra-Flex™ diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
XPX8/SSAAA/NEU/NE/NE/0320
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
632 L/min (167 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-14115 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | XPX8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped metal |
| Wetted housing | Stainless steel |
| Diaphragm material | Neoprene Ultra-Flex™ |
| Check ball material | Neoprene |
| Valve seat material | Neoprene |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
| Maximum flow | 632 L/min (167 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Displacement per stroke | 2.1 L (0.56 gal) |
| Listed shipping weight | 53 kg (117 lb) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Special option code | 0320 · Single-point exhaust center block |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 08-14115 and XPX8/SSAAA/NEU/NE/NE/0320, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.