
| Item | 08-14116 |
|---|---|
| Model | XPX800/HHSSS/TNU/TF/HTF |
| Series | Pro-Flo X |
| Wetted material | Alloy C |
| Diaphragm material | PTFE with Neoprene back-up |
| Nominal model size | 2-inch |
| Construction | Bolted metal |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO X SERIES
08-14116 · 2-inch Alloy C AODD Pump
This 2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses alloy c wetted housing and PTFE with Neoprene back-up diaphragms. Its bolted metal construction is identified by the complete ordering code below.
Complete model
XPX800/HHSSS/TNU/TF/HTF
NOMINAL MODEL SIZE
2-inch
WETTED HOUSING
Alloy C
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-14116 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | XPX800 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Bolted metal |
| Wetted housing | Alloy C |
| Diaphragm material | PTFE with Neoprene back-up |
| Check ball material | PTFE |
| Valve seat material | Alloy C |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
| Maximum air supply pressure | 8.6 bar (125 psig) |
|---|---|
| Displacement per stroke | 1.9 L (0.51 gal) |
| Listed shipping weight | 54 kg (119 lb) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Alloy C |
|---|---|
| Air chambers | Stainless steel |
| Center section | Stainless steel |
| Air valve | Stainless steel |
| Valve seat O-rings | PTFE |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 08-14116 and XPX800/HHSSS/TNU/TF/HTF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.