WILDENAODD pumps, kits & parts
WILDEN 08-14218 PX8/PKSPP/TEU/TF/PTV
Item 08-14218
Model PX8/PKSPP/TEU/TF/PTV
Series Pro-Flo X
Wetted material Polypropylene
Diaphragm material PTFE with EPDM back-up
Nominal model size 2-inch
Construction Clamped plastic
Actual fluid inlet / discharge size 51 mm (2")

WILDEN / PRO-FLO X SERIES

08-14218 · 2-inch Polypropylene AODD Pump

This 2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses polypropylene wetted housing and PTFE with EPDM back-up diaphragms. Its clamped plastic construction is identified by the complete ordering code below.

Complete model
PX8/PKSPP/TEU/TF/PTV

NOMINAL MODEL SIZE

2-inch

MAXIMUM FLOW

503 L/min (133 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / 08-14218
Pump series Pro-Flo X
Pump model code PX8
Nominal model size 2-inch
Actual fluid inlet size 51 mm (2")
Actual fluid discharge size 51 mm (2")
Construction Clamped plastic
Wetted housing Polypropylene
Diaphragm material PTFE with EPDM back-up
Check ball material PTFE
Valve seat material Polypropylene

02Operating data

Maximum flow 503 L/min (133 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Displacement per stroke 1.8 L (0.47 gal)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons PVDF
Air chambers Stainless steel
Center section Polypropylene
Air valve Polypropylene
Valve seat O-rings PTFE-encapsulated FKM (Viton®)
PX8 dimensional drawing
PX 8 Pl As T I C — dimensional drawing. Click to view the full-size image.

04Performance curves

PX8 performance curve
PX8 Plastic Reduced-stroke Ptfe-fitted performance curve — reduced-stroke PTFE diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote 08-14218 and PX8/PKSPP/TEU/TF/PTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for 08-14218