
| Item | 08-14415 |
|---|---|
| Model | XH800/WWWAA/TWS/TF/MTF |
| Series | High-pressure pump (XH800) |
| Wetted material | Ductile iron |
| Diaphragm material | Full-stroke PTFE with Wil-Flex™ back-up |
| Nominal model size | 2-inch |
| Construction | Bolted metal high-pressure |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / HIGH-PRESSURE PUMPS
08-14415 · 2-inch Ductile iron AODD Pump
This 2-inch WILDEN XH800 air-operated double-diaphragm pump uses ductile iron wetted housing and Full-stroke PTFE with Wil-Flex™ back-up diaphragms. Its bolted metal high-pressure construction is identified by the complete ordering code below.
Complete model
XH800/WWWAA/TWS/TF/MTF
NOMINAL MODEL SIZE
2-inch
WETTED HOUSING
Ductile iron
DIAPHRAGM MATERIAL
Full-stroke PTFE with Wil-Flex™ back-up
01Configuration
| Brand / item number | WILDEN / 08-14415 |
|---|---|
| Pump series | High-pressure pump (XH800) |
| Pump model code | XH800 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Bolted metal high-pressure |
| Wetted housing | Ductile iron |
| Diaphragm material | Full-stroke PTFE with Wil-Flex™ back-up |
| Check ball material | PTFE |
| Valve seat material | Mild steel |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Ductile iron |
|---|---|
| Air chambers | Ductile iron |
| Center section | Aluminum |
| Air valve | Aluminum |
| Valve seat O-rings | PTFE |
04Performance curves
Use the trace for this diaphragm configuration.
Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 08-9992-99 | KIT, AIR, H/2"/A/M/M |
| Wet kit | 08-9844-55-201 | KIT, WET, 2"/H/M/TWS |
Enquiry information
Quote 08-14415 and XH800/WWWAA/TWS/TF/MTF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.