
| Item | 08-14644 |
|---|---|
| Model | PX8/WWAPP/FSS/VT/STF |
| Series | Pro-Flo X |
| Wetted material | Cast iron |
| Diaphragm material | Saniflex™ (Hytrel®) |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO X SERIES
08-14644 · 2-inch Cast iron AODD Pump
This 2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses cast iron wetted housing and Saniflex™ (Hytrel®) diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
PX8/WWAPP/FSS/VT/STF
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
675 L/min (178 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-14644 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | PX8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped metal |
| Wetted housing | Cast iron |
| Diaphragm material | Saniflex™ (Hytrel®) |
| Check ball material | FKM (Viton®) |
| Valve seat material | Stainless steel |
02Operating data
| Maximum flow | 675 L/min (178 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Displacement per stroke | 2.7 L (0.72 gal) |
| Listed shipping weight | 49 kg (109 lb) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Cast iron |
|---|---|
| Air chambers | Aluminum |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 08-14644 and PX8/WWAPP/FSS/VT/STF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.